Overview

Hammerite Red Oxide Primer is formulated for use on both bare and rusty iron and steel. It’s a high performance, quick drying primer that provides a smooth protective base for over coating. It can be used on gates, railings, fire surrounds and metal drain pipes to name a few.

• It can be used inside or outside
• Anti-corrosive formulation
• Quick drying - Topcoat can be applied after 6 hours
• For bare and rusty iron and steel

For aluminium, galvanised and all other non-ferrous metals, use .

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, dirt, grease, flaking paint or rust.

• Remove loose rust and paint with a wire brush.
• Rub down with coarse abrasive paper to provide a firm surface.
• Abrade bare steel with coarse abrasive paper.
• Degrease all surfaces with and allow to dry.

Application

Before applying Hammerite Red Oxide Primer always test a small area to ensure it adheres to the surface.

• Stir the paint thoroughly and apply with a brush.
• Hammerite recommend applying 2 coats to achieve the best results, allowing 6 hours between coats.
• A topcoat can be applied after a minimum of 6 hours, for best results allow 24 hours.
• Hammerite Red Oxide Primer can be over painted with most paints and is ideal for use with Hammerite metal paint finishes.

Note: Always follow the manufacturer instructions found on the tin.