Product Details ＋

Overview

Fast drying, water based Dulux Trade Weathershield Smooth Masonry is formulated for professional use. It's easy to apply, with excellent opacity and a smooth finish. This new formulation contains an active ingredient to inhibit the growth of mould and algae within the paint film, meaning it stays cleaner for longer. In addition to the mould inhibiting properties, the Anti-Fade technology keeps the colour for longer too.

For exterior walls
Shower resistant in 30 minutes
Anti-fade technology
New improved mould inhibiting properties
15 year protection - BBA approved
Excellent opacity

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Exterior
Recommended Use	Exterior masonry walls
Base	Water-Based
Coverage	Up to 16m2 per litre
Drying Time	30 minutes
Re-Coat Time	2-4 Hours
Recommended Coats	1-2 Coats
Application Method	Brush, Roller, Airless Spray
VOC Levels	Low

Preparation

To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).

Wash down previously painted surfaces with a detergent solution to remove all dirt, grease or chalking paint where practicable, rinse off with clean water and allow to dry.
Carefully scrape back to a firm edge all areas of poorly adhering or defective coatings and rub down thoroughly to ‘key and feather’ broken edges of existing coatings.
Precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Treat any areas affected by mould, lichens and algae with .
Make good minor defects with an appropriate filler. For larger holes and cracks, use a sand and cement mix. Allow to dry.

Application

Always follow the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before painting the entire surface to ensure compatibility.

Suitable for use on most exterior masonry and rendering concrete, roughcast, pebbledash and brickwork normally suitable for painting, such as rustic or sand faced bricks.
Do not paint common or fletton bricks. Painting of parapet, free standing and retaining walls below ground level damp-proof course is not advised, as it may be difficult to prevent moisture penetration and consequent failure of the paint coating. Painting this type of wall may also increase the risk of frost damage and spalling of the brickwork or stonework.
Give the paint a thorough stir before use. If you're painting new or bare surfaces, seal them first with a thinned coat of Dulux Trade Weathershield Smooth Masonry Paint - 1 part clean water to 5 parts paint.
Apply with a brush, roller or airless spray. Generally 2 coats are required, however if the surface has been previously painted and is in good condition, 1 coat may be enough.
Coatings applied properly, following full instructions, should give good colour stability for 15 years, as part of BBA certificate 97/3383.