Product Details ＋

Overview

Dulux Trade Vinyl Matt is a premium water-based emulsion designed for superior coverage and a flawless matt finish. Formulated with advanced AkzoNobel technology, it provides exceptional opacity and smooth application, making it ideal for all standard interior walls and ceilings. With a nearly VOC-free formulation, this paint ensures a healthier environment without compromising on performance. Whether applied with a brush, roller, or sprayer, Dulux Trade Vinyl Matt guarantees even coverage of up to 17m² per litre, delivering a smooth professional-quality result.

Superior Matt finish for walls and ceilings
High opacity formula for outstanding coverage
Flows effortlessly providing easy application
Suitable for use with brushes, rollers, or sprayers
Ultra Low VOC: 99.9% VOC-free

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	Interior walls & ceilings
Base	Water-Based
Coverage	Up to 17m2 per litre
Drying Time	Dependent on temperature and humidity
Re-Coat Time	2-4 Hours
Recommended Coats	1-2 Coats
Application Method	Brush, Roller or Sprayer
VOC Levels	Minimal
Clean Up	Remove as much product as possible from the equipment before cleaning with water

Preparation

Surfaces must be sound, clean, dry and correctly prepared (new surfaces particularly must be fully dry)

Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry.

Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer.

Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.

Any surface defects should be filled with the appropriate Polycell Trade Polyfilla.

Application

To get the best results, ensure the surfaces to be painted are sound, clean, and dry. It is recommended to test a small area of the surface to be painted to ensure compatibility and that you are happy with the finished results.

Stir thoroughly before use.

Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint).

The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient. For best colour consistency, purchase sufficient tinted paint for each job at one time from the same source. To ensure colour consistency, it is recommended to blend tins before use.

Airless Spray: For best results use a 515 or 517 Low Pressure tip @ 1300 -1700 psi (89 – 117 bar). Alternatively, use a 515 or 517 tip @ 2200 – 2600 psi (152 – 179 bar). Please note that the above recommendations are intended as a guideline only and some adjustments may need to be made to accommodate equipment type & age, substrate type and individual site & atmospheric conditions.

Always follow the manufacturer's instructions found on the tin.