Product Details ＋

Overview

Dulux Trade Satinwood is a solvent-based, hardwearing satin finish ideal to use on interior wood and metal surfaces. Tough, durable and stain resistant, it is great for skirting boards, trims, furniture and more. Dulux Trade Satinwood offers an excellent coverage, up to 17m2 per litre. There is no need for an undercoat unless the colour change is particularly strong. If this is the case, a coat of Dulux Trade Undercoat in the appropriate colour may be required.

Tough & durable
Mid-Sheen finish - ideal for interior wood and metal
Dirt resistant
Self undercoating

Tinted Colour Information

Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.

Area	Interior
Recommended Use	interior wood and metal
Base	Solvent Based
Coverage	Up to 17m2 per litre
Drying Time	4-6hours
Re-Coat Time	16-24 hours
Recommended Coats	2 Coats
Application Method	Brush, Roller
VOC Levels	High
Clean Up	Remove as much product as possible from the equipment before cleaning with white spirit

Preparation

Surfaces must be sound, clean, dry and correctly prepared (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax.

New or bare surfaces should be primed with an appropriate Dulux Trade primer.

Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.

Treat any knots in wood with an appropriate knotting solution.

Any surface defects should be filled with an appropriate Polycell Trade Polyfilla.

Application

To get the best results, ensure the surfaces to be painted are sound, clean, and dry. It is recommended to test a small area of the surface to be painted to ensure compatibility and that you are happy with the finished results.

It is recommended to only apply by brush or roller. For health and safety reasons related to all solvent-based paints, spray application is not recommended.

As with all solvent-based paints, do not apply at temperatures below 5ºC (as recommended by British Standard BS 6150).

Stir thoroughly before use.

The normal finishing process is 2 full coats of Dulux Trade Satinwood. However, where a strong colour change is required, then a coat of an appropriate coloured Dulux Trade Undercoat may be necessary.

Always follow the manufacturer's instructions found on the tin.

Note: Whilst leading-edge technology has been used in the development of this product, the nature of white solvent-based paints means that they will all discolour over time. The rate of discolouration is faster on areas with no or low natural or UV light. For long-lasting whiteness, it is recommended to use a water-based formulation such as Dulux Trade Quick Dry Satinwood.