Product Details
＋
Overview
Dulux Trade Mouldshield Fungicidal Matt is ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6, it contains a special fungicide which inhibits the growth of fungi and mould inside buildings.
- Antifungal
- Inhibits mould and fungi on walls
- Good durability and adhesion
In areas of frequent condensation or water splashes, eg in some some kitchens and bathrooms, is recommended.
| Area | Interior |
| Recommended Use | Interior walls & ceilings with mould disfigurement |
| Base | Water-Based |
| Coverage | Up to 17m² per litre |
| Drying Time | Dependent on temperature and humidity |
| Re-Coat Time | 2-4 hours, varying according to temperature and humidity, and longer in cold or damp conditions. |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush, Roller |
| VOC Levels | Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
For best results, ensure surfaces to be painted are sound, clean, and dry.
- Remove and treat any mould, algae, lichen, or moss with Weathershield Multi-Surface Fungicidal Wash.
- Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Where necessary, wash the surface to remove dirt, grease, and powdery or dusty residues. Rinse with clean water and allow to dry.
- Seal surfaces that remain powdery after thorough preparation with an appropriate .
- Where necessary, rub down and then wipe off with a damp, lint-free cloth to avoid dust.
- Any surface defects should be filled with the appropriate filler.
Application
Stir thoroughly before, we recommend to perform a test patch to ensure you are happy with the finished results.
- Apply using a brush or roller only, this product is not suitable for spraying.
- Do not use when the temperature is below 8°C (as recommended by British Standard BS6150)
- The normal finishing process is 2 full coats, but on previously painted surfaces in good condition, 1 coat may suffice.
Note: Please be aware this is for use as a biocidal paint only we recommend to read all precautions before use.
